Currently there are a very limited number of economically viable diamond mines in operation, and to put it into perspective, the largest 30 mines supplying 90% of global demand.

There are 10,000 known kimberlite pipes around the world, only 1,000 of them are diamondiferous, 100 of those are economically viable to mine. 30 Kimberlites are currently active and 20% of the total production ends up as gem quality polished diamond fit for use in jewellery industry.

Incredible assortment of rough diamonds
Credit: Anavi Diamond Group

Diamonds rarely present themselves in the accessible areas and usually located in the most inhospitable regions of the world. Therefore developing a viable diamond mine requires exploration geologists operating in high-risk environment, leading to worthless discoveries in pursuit of high value economic diamond deposit. The amount of work and investment that goes into discovery is huge but even bigger than that is developing a mining plan which is a prerequisite of financing the prospective project. A feasibility study needs to be conducted in order to determine full costs of mining, including capital and building costs as well as ongoing operational costs. This extensive process can take between two to three years before the mining company can start mine construction.

There are various types of diamond mining; Open Pit, Underground, Alluvial and Marine!

In brief, Open Pit refers to a very cost effective mining method for kimberlite deposits. In open pit mining, a large carrot-shaped hole is dig in the ground, starting from the widest part at the surface and gradually getting narrower at depth. Open pit mining expose the entire diamond bearing kimberlite so no ore is missed. One point in feasibility of an open pit mine is the strip ratio which is the ratio of waste material subject to mining to reach to the diamond bearing ore inside. The amount of host rock or the amount of material on top of the kimberlite that need to be extracted first, also known as over-burden can be a crucial element to determine the feasibility of the mine.

Largest open-pit mine in the world, the Mir open-pit mine produced over $17 billion worth of diamonds
with its deposit in more than 40 years of operation. Since 2001 the operation has transitioned to underground,
located in Russia.
Credit: ALROSA Co Ltd

A large pink rough diamond weighing 27.85 carats.
Credit: ALROSA Co Ltd

Underground mining are usually come into picture after an open pit mine is no longer feasible to extend its pit walls outward to support digging to lower depth. There are also some examples of exclusively underground mining from inception, the most common method of underground mining is block caving. This method relies on the kimberlite rock being weaker than the hosting rock, therefore a large tunnel is dug at a shallow angle to reach the ore and then a large void is extracted underneath the target kimberlite which allows the kimbertlite to collapse into the void and safely hauled away through tunnels to surface. Underground mining can extend the life of a mine by 10-20 years. While the investment is significant to make transition from open pit to underground mining but when completed it is a much more cost effective option for mining at lower depth.

Underground operation of Cullinan is renowned as an important source of large,
high value diamonds and very rare blue diamonds in South Africa.
Credit: Petra Diamonds

138.57 carat white diamond recovered at Cullinan – August 2016
Credit: Petra Diamonds

Alluvial mining happens where natural erosion has eroded the surface of a diamond bearing kimberlite rock and transported it to other locations. These diamonds are easier to access, as they are usually found in surface of rivers which makes them easy to extract and process without a need of explosives and crushing operations. The only challenge for Alluvial mining is that the diamonds have been transported over millions of years through a very expansive geography and usually large scale mining operations won’t find them feasible investment while artisanal sector would consider it.

Lucapa and its partners commenced alluvial diamond mining operations at Lulo in January 2015.
Lulo alluvial mining company (Lucapa 40% owner and operator) was formally incorporated in May 2016.
Alluvial mining and exploration activities at Lulo are focused on a ~50km stretch of the Cacuilo River
which runs through the concession. The high-value Lulo diamond production is unique, including a significant
proportion of high-end Type IIa gems and fancy colours (pinks and yellows).
Credit: Lucapa Diamond Company

Lulo Diamond Parcels.
Credit: Lucapa Diamond Company

Marine mining is facilitated through ships that vacuum the seabed through long hoses at depth up tp 500 feet and up to 460,000 cubic feet per hour. The mixture of water and gravel is transported to land-based recovery facilities to extract diamonds. Marine operations are known for recovering high quality diamonds which is due to intense natural process that occurred over millions of years and would break stones with inclusions.

Debmarine Namibia’s fleet of five marine mining vessels screening material recovered from ocean floor of
Atlantic Ocean off the coast of Namibia and The Orange River.
Credit: De Beers Group

Debmarine Namibia’s fleet of five marine mining vessels screening material recovered from ocean floor of
Atlantic Ocean off the coast of Namibia and The Orange River.
Credit: De Beers Group

All of these diamonds have been found in Africa and most of them in South Africa. The diamonds that are found elsewhere in the world aren’t as big as those in Africa, so this is where you should go if you want to try your luck finding a really big diamond 🙂

Well now that you have seen the info-graph, here are the images of these stunning diamonds:

 

#10 De Beers Millennium Star Diamond a D colour, Internally & Externally Flawless Pear Shaped Diamond , cut to perfect proportions and weighing 203.04cts.

 

#9 The Red Cross Diamond a Canary Yellow Cushion Shaped Diamond weighing 205.07cts and the cutting style is known as Stellar Brilliant due to the eight needle-like facets on the pavilion of the stone, pointing outwards from its culet facet.

#8 The De Beers Diamond is a 234.65ct Light Yellow Octahedral Shaped Diamond which was found in 1888 in Kimberley, South Africa and in 1928 was set by Cartier in the Patiala Necklace once owned by Maharaja Patiala.

#7 The Jubilee Diamond was found in 1895 in South Africa and is a glorious Cushion Shaped Diamond, E Colour and VVS2 Clarity, weighing 245.35cts.

#6 The Centenary Diamond was found in 1986 in Premier Mine, South Africa. De Beers unveiled this beauty in 1988 as a D colour, Flawless and weighing 273.85cts. It is the second largest modern cut diamond in the world and carries 164 facets on the stone and 83 facets on the girdle.

#5 The Spirit of de Grisogono is a 312.24cts the largest Black Diamond in the world which was mined in West Central Africa before imported to Switzerland and being cut by Fawaz Gruosi the founder of de Grisogono using the traditional Mogul cutting technique.

#4 The Cullinan II is a D colour, Flawless 317.40ct Cushion cut diamond also known as the Lesser Star of Africa and is in the center-front of the Imperial State Crown of Great Britain.

#3 The Incomparable is a Triollette or Shield Shape Step Cut Fancy Brownish Yellow, Flawless Diamond weighing 407.48ct and was found in 1984 in the Democratic Republic of Congo. Luxury Jeweler Mouawad has given this stunning diamond the majestic setting it deserves and has set it in to the most expensive necklace worth $55million and named L’Incomparable.

#2 The Cullinan I or The Star of Africa is a 530.20ct D Colour and Flawless Pear Shaped Diamond that is set in the Royal sceptre which is kept with other crown jewels in the Tower of London.

#1 The Golden Jubilee Diamond is a 545.67cts a Fiery Rose Cushion Cut Diamond (as described by Gabriel Tolkowski the master cutter and designer of the diamond) and is graded as Fancy Yellow Brown and is the largest faceted diamond in the world. It was purchased by a syndicate of Thai businessmen from De Beers and presented to the King Of Thailand in 1997 for his Golden Jubilee, the 50th anniversary of his coronation.

  From Right: The Cullinan I (the Star of Africa) & The Cullinan II